11: The Java
I/O System

Creating a good input/output (I/O) system is one of the more difficult tasks for the language designer.

This is evidenced by the number of different approaches. The challenge seems to be in covering all eventualities. Not only are there different sources and sinks of I/O that you want to communicate with (files, the console, network connections), but you need to talk to them in a wide variety of ways (sequential, random-access, buffered, binary, character, by lines, by words, etc.). [ Add Comment ]

The Java library designers attacked this problem by creating lots of classes. In fact, there are so many classes for Java’s I/O system that it can be intimidating at first (ironically, the Java I/O design actually prevents an explosion of classes). There was also a significant change in the I/O library after Java 1.0, when the original byte-oriented library was supplemented with char-oriented, Unicode-based I/O classes. As a result there are a fair number of classes to learn before you understand enough of Java’s I/O picture that you can use it properly. In addition, it’s rather important to understand the evolution history of the I/O library, even if your first reaction is “don’t bother me with history, just show me how to use it!” The problem is that without the historical perspective you will rapidly become confused with some of the classes and when you should and shouldn’t use them. [ Add Comment ]

This chapter will give you an introduction to the variety of I/O classes in the standard Java library and how to use them. [ Add Comment ]

Before getting into the classes that actually read and write data to streams, we’ll look a utility provided with the library to assist you in handling file directory issues. [ Add Comment ]

The File class has a deceiving name—you might think it refers to a file, but it doesn’t. It can represent either the name of a particular file or the names of a set of files in a directory. If it’s a set of files, you can ask for the set with the list( ) method, and this returns an array of String. It makes sense to return an array rather than one of the flexible container classes because the number of elements is fixed, and if you want a different directory listing you just create a different File object. In fact, “FilePath” would have been a better name for the class. This section shows an example of the use of this class, including the associated FilenameFilter interface. [ Add Comment ]

Suppose you’d like to see a directory listing. The File object can be listed in two ways. If you call list( ) with no arguments, you’ll get the full list that the File object contains. However, if you want a restricted list—for example, if you want all of the files with an extension of .java—then you use a “directory filter,” which is a class that tells how to select the File objects for display. [ Add Comment ]

Here’s the code for the example. Note that the result has been effortlessly sorted (alphabetically) using the java.utils.Array.sort( ) method and the AlphabeticComparator defined in Chapter 9:

The DirFilter class “implements” the interface FilenameFilter. It’s useful to see how simple the FilenameFilter interface is: [ Add Comment ]

It says all that this type of object does is provide a method called accept( ). The whole reason behind the creation of this class is to provide the accept( ) method to the list( ) method so that list( ) can “call back” accept( ) to determine which file names should be included in the list. Thus, this technique is often referred to as a callback or sometimes a functor (that is, DirFilter is a functor because its only job is to hold a method) or the Command Pattern. Because list( ) takes a FilenameFilter object as its argument, it means that you can pass an object of any class that implements FilenameFilter to choose (even at run-time) how the list( ) method will behave. The purpose of a callback is to provide flexibility in the behavior of code. [ Add Comment ]

DirFilter shows that just because an interface contains only a set of methods, you’re not restricted to writing only those methods. (You must at least provide definitions for all the methods in an interface, however.) In this case, the DirFilter constructor is also created. [ Add Comment ]

The accept( ) method must accept a File object representing the directory that a particular file is found in, and a String containing the name of that file. You might choose to use or ignore either of these arguments, but you will probably at least use the file name. Remember that the list( ) method is calling accept( ) for each of the file names in the directory object to see which one should be included—this is indicated by the boolean result returned by accept( ). [ Add Comment ]

To make sure the element you’re working with is only the file name and contains no path information, all you have to do is take the String object and create a File object out of it, then call getName( ), which strips away all the path information (in a platform-independent way). Then accept( ) uses the String class indexOf( ) method to see if the search string afn appears anywhere in the name of the file. If afn is found within the string, the return value is the starting index of afn, but if it’s not found the return value is -1. Keep in mind that this is a simple string search and does not have “glob” expression wildcard matching—such as “fo?.b?r*”—which is much more difficult to implement. [ Add Comment ]

The list( ) method returns an array. You can query this array for its length and then move through it selecting the array elements. This ability to easily pass an array in and out of a method is a tremendous improvement over the behavior of C and C++. [ Add Comment ]

This example is ideal for rewriting using an anonymous inner class (described in Chapter 8). As a first cut, a method filter( ) is created that returns a reference to a FilenameFilter:

Note that the argument to filter( ) must be final. This is required by the anonymous inner class so that it can use an object from outside its scope. [ Add Comment ]

This design is an improvement because the FilenameFilter class is now tightly bound to DirList2. However, you can take this approach one step further and define the anonymous inner class as an argument to list( ), in which case it’s even smaller:

The argument to main( ) is now final, since the anonymous inner class uses args[0] directly. [ Add Comment ]

This shows you how anonymous inner classes allow the creation of quick-and-dirty classes to solve problems. Since everything in Java revolves around classes, this can be a useful coding technique. One benefit is that it keeps the code that solves a particular problem isolated together in one spot. On the other hand, it is not always as easy to read, so you must use it judiciously. [ Add Comment ]

The File class is more than just a representation for an existing file or directory. You can also use a File object to create a new directory or an entire directory path if it doesn’t exist. You can also look at the characteristics of files (size, last modification date, read/write), see whether a File object represents a file or a directory, and delete a file. This program shows some of the other methods available with the File class (see the HTML documentation from java.sun.com for the full set):

In fileData( ) you can see various file investigation methods used to display information about the file or directory path. [ Add Comment ]

The first method that’s exercised by main( ) is renameTo( ), which allows you to rename (or move) a file to an entirely new path represented by the argument, which is another File object. This also works with directories of any length. [ Add Comment ]

If you experiment with the above program, you’ll find that you can make a directory path of any complexity because mkdirs( ) will do all the work for you. [ Add Comment ]

I/O libraries often use the abstraction of a stream, which represents any data source or sink as an object capable of producing or receiving pieces of data. The stream hides the details of what happens to the data inside the actual I/O device. [ Add Comment ]

The Java library classes for I/O are divided by input and output, as you can see by looking at the online Java class hierarchy with your Web browser. By inheritance, everything derived from the InputStream or Reader classes have basic methods called read( ) for reading a single byte or array of bytes. Likewise, everything derived from OutputStream or Writer classes have basic methods called write( ) for writing a single byte or array of bytes. However, you won’t generally use these methods; they exist so that other classes can use them—these other classes provide a more useful interface. Thus, you’ll rarely create your stream object by using a single class, but instead will layer multiple objects together to provide your desired functionality. The fact that you create more than one object to create a single resulting stream is the primary reason that Java’s stream library is confusing. [ Add Comment ]

It’s helpful to categorize the classes by their functionality. In Java 1.0, the library designers started by deciding that all classes that had anything to do with input would be inherited from InputStream and all classes that were associated with output would be inherited from OutputStream. [ Add Comment ]

InputStream’s job is to represent classes that produce input from different sources. These sources can be:

pipe: you put things in one end and they come out the other.

Each of these has an associated subclass of InputStream. In addition, the FilterInputStream is also a type of InputStream, to provide a base class for "decorator" classes that attach attributes or useful interfaces to input streams. This is discussed later. [ Add Comment ]

Table 11-1. Types of InputStream

This category includes the classes that decide where your output will go: an array of bytes (no String, however; presumably you can create one using the array of bytes), a file, or a “pipe.” [ Add Comment ]

In addition, the FilterOutputStream provides a base class for "decorator" classes that attach attributes or useful interfaces to output streams. This is discussed later. [ Add Comment ]

Table 11-2. Types of OutputStream

The use of layered objects to dynamically and transparently add responsibilities to individual objects is referred to as the Decorator pattern. (Patterns[57] are the subject of Thinking in Patterns with Java, downloadable at www.BruceEckel.com.) The decorator pattern specifies that all objects that wrap around your initial object have the same interface. This makes the basic use of the decorators transparent—you send the same message to an object whether it’s been decorated or not. This is the reason for the existence of the “filter” classes in the Java I/O library: the abstract “filter” class is the base class for all the decorators. (A decorator must have the same interface as the object it decorates, but the decorator can also extend the interface, which occurs in several of the “filter” classes). [ Add Comment ]

Decorators are often used when simple subclassing results in a large number of subclasses in order to satisfy every possible combination that is needed—so many subclasses that it becomes impractical. The Java I/O library requires many different combinations of features, which is why the decorator pattern is used. There is a drawback to the decorator pattern, however. Decorators give you much more flexibility while you’re writing a program (since you can easily mix and match attributes), but they add complexity to your code. The reason that the Java I/O library is awkward to use is that you must create many classes—the “core” I/O type plus all the decorators—in order to get the single I/O object that you want. [ Add Comment ]

The classes that provide the decorator interface to control a particular InputStream or OutputStream are the FilterInputStream and FilterOutputStream—which don’t have very intuitive names. FilterInputStream and FilterOutputStream are abstract classes that are derived from the base classes of the I/O library, InputStream and OutputStream, which is the key requirement of the decorator (so that it provides the common interface to all the objects that are being decorated). [ Add Comment ]

The FilterInputStream classes accomplish two significantly different things. DataInputStream allows you to read different types of primitive data as well as String objects. (All the methods start with “read,” such as readByte( ), readFloat( ), etc.) This, along with its companion DataOutputStream, allows you to move primitive data from one place to another via a stream. These “places” are determined by the classes in Table 11-1. [ Add Comment ]

The remaining classes modify the way an InputStream behaves internally: whether it’s buffered or unbuffered, if it keeps track of the lines it’s reading (allowing you to ask for line numbers or set the line number), and whether you can push back a single character. The last two classes look a lot like support for building a compiler (that is, they were added to support the construction of the Java compiler), so you probably won’t use them in general programming. [ Add Comment ]

You’ll probably need to buffer your input almost every time, regardless of the I/O device you’re connecting to, so it would have made more sense for the I/O library to make a special case (or simply a method call) for unbuffered input rather than buffered input. [ Add Comment ]

Table 11-3. Types of FilterInputStream

The complement to DataInputStream is DataOutputStream, which formats each of the primitive types and String objects onto a stream in such a way that any DataInputStream, on any machine, can read them. All the methods start with “write,” such as writeByte( ), writeFloat( ), etc. [ Add Comment ]

The original intent of PrintStream was to print all of the primitive data types and String objects in a viewable format. This is different from DataOutputStream, whose goal is to put data elements on a stream in a way that DataInputStream can portably reconstruct them. [ Add Comment ]

The two important methods in PrintStream are print( ) and println( ), which are overloaded to print all the various types. The difference between print( ) and println( ) is that the latter adds a newline when it’s done. [ Add Comment ]

PrintStream can be problematic because it traps all IOExceptions (You must explicitly test the error status with checkError( ), which returns true if an error has occurred). Also, PrintStream doesn’t internationalize properly and doesn’t handle line breaks in a platform independent way (these problems are solved with PrintWriter). [ Add Comment ]

BufferedOutputStream is a modifier and tells the stream to use buffering so you don’t get a physical write every time you write to the stream. You’ll probably always want to use this with files, and possibly console I/O. [ Add Comment ]

Table 11-4. Types of FilterOutputStream

Java 1.1 made some significant modifications to the fundamental I/O stream library (Java 2, however, did not make fundamental modifications). When you see the Reader and Writer classes your first thought (like mine) might be that these were meant to replace the InputStream and OutputStream classes. But that’s not the case. Although some aspects of the original streams library are deprecated (if you use them you will receive a warning from the compiler), the InputStream and OutputStream classes still provide valuable functionality in the form of byte-oriented I/O, while the Reader and Writer classes provide Unicode-compliant, character-based I/O. In addition: [ Add Comment ]

The most important reason for the Reader and Writer hierarchies is for internationalization. The old I/O stream hierarchy supports only 8-bit byte streams and doesn’t handle the 16-bit Unicode characters well. Since Unicode is used for internationalization (and Java’s native char is 16-bit Unicode), the Reader and Writer hierarchies were added to support Unicode in all I/O operations. In addition, the new libraries are designed for faster operations than the old. [ Add Comment ]

As is the practice in this book, I will attempt to provide an overview of the classes, but assume that you will use online documentation to determine all the details, such as the exhaustive list of methods. [ Add Comment ]

Almost all of the original Java I/O stream classes have corresponding Reader and Writer classes to provide native Unicode manipulation. However, there are some places where the byte-oriented InputStreams and OutputStreams are the correct solution; in particular, the java.util.zip libraries are byte-oriented rather than char-oriented. So the most sensible approach to take is to try to use the Reader and Writer classes whenever you can, and you’ll discover the situations when you have to use the byte-oriented libraries because your code won’t compile. [ Add Comment ]

Here is a table that shows the correspondence between the sources and sinks of information (that is, where the data physically comes from or goes to) in the two hierarchies.

In general, you’ll find that the interfaces for the two different hierarchies are similar if not identical.

For InputStreams and OutputStreams, streams were adapted for particular needs using “decorator” subclasses of FilterInputStream and FilterOutputStream. The Reader and Writer class hierarchies continue the use of this idea—but not exactly. [ Add Comment ]

In the following table, the correspondence is a rougher approximation than in the previous table. The difference is because of the class organization: while BufferedOutputStream is a subclass of FilterOutputStream, BufferedWriter is not a subclass of FilterWriter (which, even though it is abstract, has no subclasses and so appears to have been put in either as a placeholder or simply so you wouldn’t wonder where it was). However, the interfaces to the classes are quite a close match.

There’s one direction that’s quite clear: Whenever you want to use readLine( ), you shouldn’t do it with a DataInputStream any more (this is met with a deprecation message at compile-time), but instead use a BufferedReader. Other than this, DataInputStream is still a “preferred” member of the I/O library.

To make the transition to using a PrintWriter easier, it has constructors that take any OutputStream object, as well as Writer objects. However, PrintWriter has no more support for formatting than PrintStream does; the interfaces are virtually the same. [ Add Comment ]

The PrintWriter constructor also has an option to perform automatic flushing, which happens after every println( ) if the constructor flag is set. [ Add Comment ]

Some classes were left unchanged between Java 1.0 and Java 1.1:

DataOutputStream, in particular, is used without change, so for storing and retrieving data in a transportable format you use the InputStream and OutputStream hierarchies.

RandomAccessFile is used for files containing records of known size so that you can move from one record to another using seek( ), then read or change the records. The records don’t have to be the same size; you just have to be able to determine how big they are and where they are placed in the file. [ Add Comment ]

At first it’s a little bit hard to believe that RandomAccessFile is not part of the InputStream or OutputStream hierarchy. However, it has no association with those hierarchies other than that it happens to implement the DataInput and DataOutput interfaces (which are also implemented by DataInputStream and DataOutputStream). It doesn’t even use any of the functionality of the existing InputStream or OutputStream classes—it’s a completely separate class, written from scratch, with all of its own (mostly native) methods. The reason for this may be that RandomAccessFile has essentially different behavior than the other I/O types, since you can move forward and backward within a file. In any event, it stands alone, as a direct descendant of Object. [ Add Comment ]

Essentially, a RandomAccessFile works like a DataInputStream pasted together with a DataOutputStream, along with the methods getFilePointer( ) to find out where you are in the file, seek( ) to move to a new point in the file, and length( ) to determine the maximum size of the file. In addition, the constructors require a second argument (identical to fopen( ) in C) indicating whether you are just randomly reading (“r”) or reading and writing (“rw”). There’s no support for write-only files, which could suggest that RandomAccessFile might have worked well if it were inherited from DataInputStream. [ Add Comment ]

The seeking methods are available only in RandomAccessFile, which works for files only. BufferedInputStream does allow you to mark( ) a position (whose value is held in a single internal variable) and reset( ) to that position, but this is limited and not very useful. [ Add Comment ]

Although you can combine the I/O stream classes in many different ways, you’ll probably just use a few combinations. The following example can be used as a basic reference; it shows the creation and use of typical I/O configurations. Note that each configuration begins with a commented number and title that corresponds to the heading for the appropriate explanation that follows in the text.

Here are the descriptions for the numbered sections of the program: [ Add Comment ]

Parts 1 through 4 demonstrate the creation and use of input streams. Part 4 also shows the simple use of an output stream.

To open a file for character input, you use a FileInputReader with a String or a File object as the file name. For speed, you’ll want that file to be buffered so you give the resulting reference to the constructor for a BufferedReader. Since BufferedReader also provides the readLine( ) method, this is your final object and the interface you read from. When you reach the end of the file, readLine( ) returns null so that is used to break out of the while loop. [ Add Comment ]

The String s2 is used to accumulate the entire contents of the file (including newlines that must be added since readLine( ) strips them off). s2 is then used in the later portions of this program. Finally, close( ) is called to close the file. Technically, close( ) will be called when finalize( ) runs, and this is supposed to happen (whether or not garbage collection occurs) as the program exits. However, this has been inconsistently implemented, so the only safe approach is to explicitly call close( ) for files. [ Add Comment ]

Section 1b shows how you can wrap System.in for reading console input. System.in is a DataInputStream and BufferedReader needs a Reader argument, so InputStreamReader is brought in to perform the translation. [ Add Comment ]

This section takes the String s2 that now contains the entire contents of the file and uses it to create a StringReader. Then read( ) is used to read each character one at a time and send it out to the console. Note that read( ) returns the next byte as an int and thus it must be cast to a char to print properly. [ Add Comment ]

To read “formatted” data, you use a DataInputStream, which is a byte-oriented I/O class (rather than char oriented). Thus you must use all InputStream classes rather than Reader classes. Of course, you can read anything (such as a file) as bytes using InputStream classes, but here a String is used. To convert the String to an array of bytes, which is what is appropriate for a ByteArrayInputStream, String has a getBytes( ) method to do the job. At that point, you have an appropriate InputStream to hand to DataInputStream. [ Add Comment ]

If you read the characters from a DataInputStream one byte at a time using readByte( ), any byte value is a legitimate result so the return value cannot be used to detect the end of input. Instead, you can use the available( ) method to find out how many more characters are available. Here’s an example that shows how to read a file one byte at a time:

Note that available( ) works differently depending on what sort of medium you’re reading from; it’s literally “the number of bytes that can be read without blocking.” With a file this means the whole file, but with a different kind of stream this might not be true, so use it thoughtfully. [ Add Comment ]

You could also detect the end of input in cases like these by catching an exception. However, the use of exceptions for control flow is considered a misuse of that feature. [ Add Comment ]

This example also shows how to write data to a file. First, a FileWriter is created to connect to the file. You’ll virtually always want to buffer the output by wrapping it in a BufferedWriter (try removing this wrapping to see the impact on the performance—buffering tends to dramatically increase performance of I/O operations). Then for the formatting it’s turned into a PrintWriter. The data file created this way is readable as an ordinary text file. [ Add Comment ]

As the lines are written to the file, line numbers are added. Note that LineNumberInputStream is not used, because it’s a silly class and you don’t need it. As shown here, it’s trivial to keep track of your own line numbers. [ Add Comment ]

When the input stream is exhausted, readLine( ) returns null. You’ll see an explicit close( ) for out1, because if you don’t call close( ) for all your output files, you might discover that the buffers don’t get flushed so they’re incomplete. [ Add Comment ]

The two primary kinds of output streams are separated by the way they write data: one writes it for human consumption, and the other writes it to be reacquired by a DataInputStream. The RandomAccessFile stands alone, although its data format is compatible with the DataInputStream and DataOutputStream. [ Add Comment ]

A PrintWriter formats data so it’s readable by a human. However, to output data so that it can be recovered by another stream, you use a DataOutputStream to write the data and a DataInputStream to recover the data. Of course, these streams could be anything, but here a file is used, buffered for both reading and writing. DataOutputStream and DataInputStream are byte-oriented and thus require the InputStreams and OutputStreams. [ Add Comment ]

If you use a DataOutputStream to write the data, then Java guarantees that you can accurately recover the data using a DataInputStream—regardless of what different platforms write and read the data. This is incredibly valuable, as anyone knows who has spent time worrying about platform-specific data issues. That problem vanishes if you have Java on both platforms[58]. [ Add Comment ]

Note that the character string is written using both writeChars( ) and writeBytes( ). When you run the program, you’ll discover that writeChars( ) outputs 16-bit Unicode characters. When you read the line using readLine( ), you’ll see that there is a space between each character, because of the extra byte inserted by Unicode. Since there is no complementary “readChars” method in DataInputStream, you’re stuck pulling these characters off one at a time with readChar( ). So for ASCII, it’s easier to write the characters as bytes followed by a newline; then use readLine( ) to read back the bytes as a regular ASCII line.When using a DataOutputStream, the only reliable way to write a String so that it can be recovered by a DataInputStream is to use UTF-8 encoding, accomplished above using writeUTF( ) and readUTF( ). UTF-8 is a variation on Unicode, which stores all characters in 2 bytes. If you’re working with ASCII or mostly ASCII characters (which only occupy 7 bits), this is a tremendous waste of space and/or bandwidth, so UTF-8 encodes ASCII characters in a single byte, and non-ASCII characters in two or three bytes. In addition, the length of the string is stored in the first two bytes. However, writeUTF( ) and readUTF( ) use a special variation of UTF-8 for Java (which is completely described in the JavaSoft HTML documentation for those methods) and so if you read a string written with writeUTF( ) using a non-Java program, you must write special code in order to read the string properly. [ Add Comment ]

With writeUTF( ) and readUTF( ), you can intermingle Strings and other types of data using a DataOutputStream with the knowledge that the Strings will be properly stored as Unicode, and will be easily recoverable with a DataInputStream. [ Add Comment ]

The writeDouble( ) stores the double number to the stream and the complementary readDouble( ) recovers it (there are similar methods for reading and writing the other types). But for any of the reading methods to work correctly, you must know the exact placement of the data item in the stream, since it would be equally possible to read the stored double as a simple sequence of bytes, or as a char, etc. So you must either have a fixed format for the data in the file or extra information must be stored in the file that you parse to determine where the data is located. Note that object serialization (described later in this chapter) may be an easier way to store and retrieve complex data structures. [ Add Comment ]

As previously noted, the RandomAccessFile is almost totally isolated from the rest of the I/O hierarchy, save for the fact that it implements the DataInput and DataOutput interfaces. So you cannot combine it with any of the aspects of the InputStream and OutputStream subclasses. Even though it might make sense to treat a ByteArrayInputStream as a random access element, you can use RandomAccessFile to only open a file. You must assume a RandomAccessFile is properly buffered since you cannot add that. [ Add Comment ]

The one option you have is in the second constructor argument: you can open a RandomAccessFile to read (“r”) or read and write (“rw”). [ Add Comment ]

Using a RandomAccessFile is like using a combined DataInputStream and DataOutputStream (because it implements the equivalent interfaces). In addition, you can see that seek( ) is used to move about in the file and change one of the values. [ Add Comment ]

If you look at section 5, you’ll see that the data is written before the text. That’s because a problem was introduced in Java 1.1 (and persists in Java 2) that sure seems like a bug to me, but I reported it and the bug people at JavaSoft said that this is the way it is supposed to work (however, the problem did not occur in Java 1.0, which makes me suspicious). The problem is shown in the following code:

} ///:~

[Removed from text] (This was a bug in my reasoning – I did not understand the intention of writeUTF( ) and readUTF( ). Also, creating two buffers for the same stream turns out to be a big mistake – the first buffer that you read sucks up extra bytes so the second buffer gets indeterminate output). [ Add Comment ]

The PipedInputStream, PipedOutputStream, PipedReader and PipedWriter have been mentioned only briefly in this chapter. This is not to suggest that they aren’t useful, but their value is not apparent until you begin to understand multithreading, since the piped streams are used to communicate between threads. This is covered along with an example in Chapter 14. [ Add Comment ]

The term standard I/O refers to the Unix concept (which is reproduced in some form in Windows and many other operating systems) of a single stream of information that is used by a program. All the program’s input can come from standard input, all its output can go to standard output, and all of its error messages can be sent to standard error. The value of standard I/O is that programs can easily be chained together and one program’s standard output can become the standard input for another program. This is a powerful tool. [ Add Comment ]

Following the standard I/O model, Java has System.in, System.out, and System.err. Throughout this book you’ve seen how to write to standard output using System.out, which is already prewrapped as a PrintStream object. System.err is likewise a PrintStream, but System.in is a raw InputStream, with no wrapping. This means that while you can use System.out and System.err right away, System.in must be wrapped before you can read from it. [ Add Comment ]

Typically, you’ll want to read input a line at a time using readLine( ), so you’ll want to wrap System.in in a BufferedReader. To do this, you must convert System.in to a Reader using InputStreamReader. Here’s an example that simply echoes each line that you type in:

The reason for the exception specification is that readLine( ) can throw an IOException. Note that System.in should usually be buffered, as with most streams. [ Add Comment ]

System.out is a PrintStream, which is an OutputStream. PrintWriter has a constructor that takes an OutputStream as an argument. Thus, if you want you can convert System.out into a PrintWriter using that constructor:

It’s important to use the two-argument version of the PrintWriter constructor and to set the second argument to true in order to enable automatic flushing, otherwise you may not see the output. [ Add Comment ]

The Java System class allows you to redirect the standard input, output, and error I/O streams using simple static method calls:

setIn(InputStream)
setOut(PrintStream)
setErr(PrintStream) [ Add Comment ]

Redirecting output is especially useful if you suddenly start creating a large amount of output on your screen and it’s scrolling past faster than you can read it.[59] Redirecting input is valuable for a command-line program in which you want to test a particular user-input sequence repeatedly. Here’s a simple example that shows the use of these methods:

This program attaches standard input to a file, and redirects standard output and standard error to another file. [ Add Comment ]

I/O redirection manipulates streams of bytes, not streams of characters, thus InputStreams and OutputStreams are used rather than Readers and Writers. [ Add Comment ]

The Java I/O library contains classes to support reading and writing streams in a compressed format. These are wrapped around existing I/O classes to provide compression functionality. [ Add Comment ]

These classes are not derived from the Reader and Writer classes, but instead are part of the InputStream and OutputStream hierarchies. This is because the compression library works with bytes, not characters. However, you might sometimes be forced to mix the two types of streams. (Remember that you can use InputStreamReader and OutputStreamWriter to provide easy conversion between one type and another.)

Although there are many compression algorithms, Zip and GZIP are possibly the most commonly used. Thus you can easily manipulate your compressed data with the many tools available for reading and writing these formats.

The GZIP interface is simple and thus is probably more appropriate when you have a single stream of data that you want to compress (rather than a container of dissimilar pieces of data). Here’s an example that compresses a single file:

The use of the compression classes is straightforward—you simply wrap your output stream in a GZIPOutputStream or ZipOutputStream and your input stream in a GZIPInputStream or ZipInputStream. All else is ordinary I/O reading and writing. This is an example of mixing the char-oriented streams with the byte-oriented streams: in uses the Reader classes, whereas GZIPOutputStream’s constructor can accept only an OutputStream object, not a Writer object. When the file is opened, the GZIPInputStream is converted to a Reader. [ Add Comment ]

The library that supports the Zip format is much more extensive. With it you can easily store multiple files, and there’s even a separate class to make the process of reading a Zip file easy. The library uses the standard Zip format so that it works seamlessly with all the tools currently downloadable on the Internet. The following example has the same form as the previous example, but it handles as many command-line arguments as you want. In addition, it shows the use of the Checksum classes to calculate and verify the checksum for the file. There are two Checksum types: Adler32 (which is faster) and CRC32 (which is slower but slightly more accurate). [ Add Comment ]

For each file to add to the archive, you must call putNextEntry( ) and pass it a ZipEntry object. The ZipEntry object contains an extensive interface that allows you to get and set all the data available on that particular entry in your Zip file: name, compressed and uncompressed sizes, date, CRC checksum, extra field data, comment, compression method, and whether it’s a directory entry. However, even though the Zip format has a way to set a password, this is not supported in Java’s Zip library. And although CheckedInputStream and CheckedOutputStream support both Adler32 and CRC32 checksums, the ZipEntry class supports only an interface for CRC. This is a restriction of the underlying Zip format, but it might limit you from using the faster Adler32. [ Add Comment ]

To extract files, ZipInputStream has a getNextEntry( ) method that returns the next ZipEntry if there is one. As a more succinct alternative, you can read the file using a ZipFile object, which has a method entries( ) to return an Enumeration to the ZipEntries. [ Add Comment ]

In order to read the checksum you must somehow have access to the associated Checksum object. Here, a reference to the CheckedOutputStream and CheckedInputStream objects is retained, but you could also just hold onto a reference to the Checksum object. [ Add Comment ]

A baffling method in Zip streams is setComment( ). As shown above, you can set a comment when you’re writing a file, but there’s no way to recover the comment in the ZipInputStream. Comments appear to be supported fully on an entry-by-entry basis only via ZipEntry. [ Add Comment ]

Of course, you are not limited to files when using the GZIP or Zip libraries—you can compress anything, including data to be sent through a network connection. [ Add Comment ]

The Zip format is also used in the JAR (Java ARchive) file format, which is a way to collect a group of files into a single compressed file, just like Zip. However, like everything else in Java, JAR files are cross-platform so you don’t need to worry about platform issues. You can also include audio and image files as well as class files. [ Add Comment ]

JAR files are particularly helpful when you deal with the Internet. Before JAR files, your Web browser would have to make repeated requests of a Web server in order to download all of the files that make up an applet. In addition, each of these files was uncompressed. By combining all of the files for a particular applet into a single JAR file, only one server request is necessary and the transfer is faster because of compression. And each entry in a JAR file can be digitally signed for security (refer to the Java documentation for details). [ Add Comment ]

A JAR file consists of a single file containing a collection of zipped files along with a “manifest” that describes them. (You can create your own manifest file; otherwise the jar program will do it for you.) You can find out more about JAR manifests in the JDK HTML documentation. [ Add Comment ]

The jar utility that comes with Sun’s JDK automatically compresses the files of your choice. You invoke it on the command line: [ Add Comment ]

The options are simply a collection of letters (no hyphen or any other indicator is necessary). Unix/Linux users will note the similarity to the tar options. These are:

If a subdirectory is included in the files to be put into the JAR file, that subdirectory is automatically added, including all of its subdirectories, etc. Path information is also preserved.

Here are some typical ways to invoke jar:

This creates a JAR file called myJarFile.jar that contains all of the class files in the current directory, along with an automatically generated manifest file. [ Add Comment ]

Like the previous example, but adding a user-created manifest file called myManifestFile.mf. [ Add Comment ]

Produces a table of contents of the files in myJarFile.jar. [ Add Comment ]

Adds the “verbose” flag to give more detailed information about the files in myJarFile.jar. [ Add Comment ]

Assuming audio, classes, and image are subdirectories, this combines all of the subdirectories into the file myApp.jar. The “verbose” flag is also included to give extra feedback while the jar program is working. [ Add Comment ]

If you create a JAR file using the 0 option, that file can be placed in your CLASSPATH:

Then Java can search lib1.jar and lib2.jar for class files. [ Add Comment ]

The jar tool isn’t as useful as a zip utility. For example, you can’t add or update files to an existing JAR file; you can create JAR files only from scratch. Also, you can’t move files into a JAR file, erasing them as they are moved. However, a JAR file created on one platform will be transparently readable by the jar tool on any other platform (a problem that sometimes plagues zip utilities). [ Add Comment ]

As you will see in Chapter 13, JAR files are also used to package JavaBeans. [ Add Comment ]

Java’s object serialization allows you to take any object that implements the Serializable interface and turn it into a sequence of bytes that can later be fully restored to regenerate the original object. This is even true across a network, which means that the serialization mechanism automatically compensates for differences in operating systems. That is, you can create an object on a Windows machine, serialize it, and send it across the network to a Unix machine where it will be correctly reconstructed. You don’t have to worry about the data representations on the different machines, the byte ordering, or any other details. [ Add Comment ]

By itself, object serialization is interesting because it allows you to implement lightweight persistence. Remember that persistence means an object’s lifetime is not determined by whether a program is executing—the object lives in between invocations of the program. By taking a serializable object and writing it to disk, then restoring that object when the program is reinvoked, you’re able to produce the effect of persistence. The reason it’s called “lightweight” is that you can’t simply define an object using some kind of “persistent” keyword and let the system take care of the details (although this might happen in the future). Instead, you must explicitly serialize and deserialize the objects in your program. [ Add Comment ]

Object serialization was added to the language to support two major features. Java’s remote method invocation (RMI) allows objects that live on other machines to behave as if they live on your machine. When sending messages to remote objects, object serialization is necessary to transport the arguments and return values. RMI is discussed in Chapter 15. [ Add Comment ]

Object serialization is also necessary for JavaBeans, described in Chapter 13. When a Bean is used, its state information is generally configured at design-time. This state information must be stored and later recovered when the program is started; object serialization performs this task. [ Add Comment ]

Serializing an object is quite simple, as long as the object implements the Serializable interface (this interface is just a flag and has no methods). When serialization was added to the language, many standard library classes were changed to make them serializable, including all of the wrappers for the primitive types, all of the container classes, and many others. Even Class objects can be serialized. (See Chapter 12 for the implications of this.) [ Add Comment ]

To serialize an object, you create some sort of OutputStream object and then wrap it inside an ObjectOutputStream object. At this point you need only call writeObject( ) and your object is serialized and sent to the OutputStream. To reverse the process, you wrap an InputStream inside an ObjectInputStream and call readObject( ). What comes back is, as usual, a reference to an upcast Object, so you must downcast to set things straight. [ Add Comment ]

A particularly clever aspect of object serialization is that it not only saves an image of your object but it also follows all the references contained in your object and saves those objects, and follows all the references in each of those objects, etc. This is sometimes referred to as the “web of objects” that a single object can be connected to, and it includes arrays of references to objects as well as member objects. If you had to maintain your own object serialization scheme, maintaining the code to follow all these links would be a bit mind-boggling. However, Java object serialization seems to pull it off flawlessly, no doubt using an optimized algorithm that traverses the web of objects. The following example tests the serialization mechanism by making a “worm” of linked objects, each of which has a link to the next segment in the worm as well as an array of references to objects of a different class, Data:

To make things interesting, the array of Data objects inside Worm are initialized with random numbers. (This way you don’t suspect the compiler of keeping some kind of meta-information.) Each Worm segment is labeled with a char that’s automatically generated in the process of recursively generating the linked list of Worms. When you create a Worm, you tell the constructor how long you want it to be. To make the next reference it calls the Worm constructor with a length of one less, etc. The final next reference is left as null, indicating the end of the Worm. [ Add Comment ]

The point of all this was to make something reasonably complex that couldn’t easily be serialized. The act of serializing, however, is quite simple. Once the ObjectOutputStream is created from some other stream, writeObject( ) serializes the object. Notice the call to writeObject( ) for a String, as well. You can also write all the primitive data types using the same methods as DataOutputStream (they share the same interface). [ Add Comment ]

There are two separate code sections that look similar. The first writes and reads a file and the second, for variety, writes and reads a ByteArray. You can read and write an object using serialization to any DataInputStream or DataOutputStream including, as you will see in the Chapter 15, a network. The output from one run was:

You can see that the deserialized object really does contain all of the links that were in the original object. [ Add Comment ]

Note that no constructor, not even the default constructor, is called in the process of deserializing a Serializable object. The entire object is restored by recovering data from the InputStream. [ Add Comment ]

Object serialization is byte-oriented, and thus uses the InputStream and OutputStream hierarchies. [ Add Comment ]

You might wonder what’s necessary for an object to be recovered from its serialized state. For example, suppose you serialize an object and send it as a file or through a network to another machine. Could a program on the other machine reconstruct the object using only the contents of the file? [ Add Comment ]

The best way to answer this question is (as usual) by performing an experiment. The following file goes in the subdirectory for this chapter: [ Add Comment ]

The file that creates and serializes an Alien object goes in the same directory: [ Add Comment ]

Rather than catching and handling exceptions, this program takes the quick and dirty approach of passing the exceptions out of main( ), so they’ll be reported on the command line. [ Add Comment ]

Once the program is compiled and run, copy the resulting X.file to a subdirectory called xfiles, where the following code goes: [ Add Comment ]

This program opens the file and reads in the object mystery successfully. However, as soon as you try to find out anything about the object—which requires the Class object for Alien—the Java Virtual Machine (JVM) cannot find Alien.class (unless it happens to be in the Classpath, which it shouldn’t be in this example). You’ll get a ClassNotFoundException. (Once again, all evidence of alien life vanishes before proof of its existence can be verified!) [ Add Comment ]

If you expect to do much after you’ve recovered an object that has been serialized, you must make sure that the JVM can find the associated .class file either in the local class path or somewhere on the Internet. [ Add Comment ]

As you can see, the default serialization mechanism is trivial to use. But what if you have special needs? Perhaps you have special security issues and you don’t want to serialize portions of your object, or perhaps it just doesn’t make sense for one subobject to be serialized if that part needs to be created anew when the object is recovered. [ Add Comment ]

You can control the process of serialization by implementing the Externalizable interface instead of the Serializable interface. The Externalizable interface extends the Serializable interface and adds two methods, writeExternal( ) and readExternal( ), that are automatically called for your object during serialization and deserialization so that you can perform your special operations. [ Add Comment ]

The following example shows simple implementations of the Externalizable interface methods. Note that Blip1 and Blip2 are nearly identical except for a subtle difference (see if you can discover it by looking at the code):

The output for this program is: [ Add Comment ]

The reason that the Blip2 object is not recovered is that trying to do so causes an exception. Can you see the difference between Blip1 and Blip2? The constructor for Blip1 is public, while the constructor for Blip2 is not, and that causes the exception upon recovery. Try making Blip2’s constructor public and removing the //! comments to see the correct results. [ Add Comment ]

When b1 is recovered, the Blip1 default constructor is called. This is different from recovering a Serializable object, in which the object is constructed entirely from its stored bits, with no constructor calls. With an Externalizable object, all the normal default construction behavior occurs (including the initializations at the point of field definition), and then readExternal( ) is called. You need to be aware of this—in particular, the fact that all the default construction always takes place—to produce the correct behavior in your Externalizable objects. [ Add Comment ]

Here’s an example that shows what you must do to fully store and retrieve an Externalizable object: [ Add Comment ]

The fields s and i are initialized only in the second constructor, but not in the default constructor. This means that if you don’t initialize s and i in readExternal( ), it will be null (since the storage for the object gets wiped to zero in the first step of object creation). If you comment out the two lines of code following the phrases “You must do this” and run the program, you’ll see that when the object is recovered, s is null and i is zero. [ Add Comment ]

If you are inheriting from an Externalizable object, you’ll typically call the base-class versions of writeExternal( ) and readExternal( ) to provide proper storage and retrieval of the base-class components. [ Add Comment ]

So to make things work correctly you must not only write the important data from the object during the writeExternal( ) method (there is no default behavior that writes any of the member objects for an Externalizable object), but you must also recover that data in the readExternal( ) method. This can be a bit confusing at first because the default construction behavior for an Externalizable object can make it seem like some kind of storage and retrieval takes place automatically. It does not. [ Add Comment ]

When you’re controlling serialization, there might be a particular subobject that you don’t want Java’s serialization mechanism to automatically save and restore. This is commonly the case if that subobject represents sensitive information that you don’t want to serialize, such as a password. Even if that information is private in the object, once it’s serialized it’s possible for someone to access it by reading a file or intercepting a network transmission. [ Add Comment ]

One way to prevent sensitive parts of your object from being serialized is to implement your class as Externalizable, as shown previously. Then nothing is automatically serialized and you can explicitly serialize only the necessary parts inside writeExternal( ). [ Add Comment ]

If you’re working with a Serializable object, however, all serialization happens automatically. To control this, you can turn off serialization on a field-by-field basis using the transient keyword, which says “Don’t bother saving or restoring this—I’ll take care of it.” [ Add Comment ]

For example, consider a Login object that keeps information about a particular login session. Suppose that, once you verify the login, you want to store the data, but without the password. The easiest way to do this is by implementing Serializable and marking the password field as transient. Here’s what it looks like:

You can see that the date and username fields are ordinary (not transient), and thus are automatically serialized. However, the password is transient, and so is not stored to disk; also the serialization mechanism makes no attempt to recover it. The output is: [ Add Comment ]

When the object is recovered, the password field is null. Note that toString( ) must check for a null value of password because if you try to assemble a String object using the overloaded ‘+’ operator, and that operator encounters a null reference, you’ll get a NullPointerException. (Newer versions of Java might contain code to avoid this problem.) [ Add Comment ]

You can also see that the date field is stored to and recovered from disk and not generated anew. [ Add Comment ]

Since Externalizable objects do not store any of their fields by default, the transient keyword is for use with Serializable objects only. [ Add Comment ]

If you’re not keen on implementing the Externalizable interface, there’s another approach. You can implement the Serializable interface and add (notice I say “add” and not “override” or “implement”) methods called writeObject( ) and readObject( ) that will automatically be called when the object is serialized and deserialized, respectively. That is, if you provide these two methods they will be used instead of the default serialization. [ Add Comment ]

The methods must have these exact signatures:

From a design standpoint, things get really weird here. First of all, you might think that because these methods are not part of a base class or the Serializable interface, they ought to be defined in their own interface(s). But notice that they are defined as private, which means they are to be called only by other members of this class. However, you don’t actually call them from other members of this class, but instead the writeObject( ) and readObject( ) methods of the ObjectOutputStream and ObjectInputStream objects call your object’s writeObject( ) and readObject( ) methods. (Notice my tremendous restraint in not launching into a long diatribe about using the same method names here. In a word: confusing.) You might wonder how the ObjectOutputStream and ObjectInputStream objects have access to private methods of your class. We can only assume that this is part of the serialization magic. [ Add Comment ]

In any event, anything defined in an interface is automatically public so if writeObject( ) and readObject( ) must be private, then they can’t be part of an interface. Since you must follow the signatures exactly, the effect is the same as if you’re implementing an interface. [ Add Comment ]

It would appear that when you call ObjectOutputStream.writeObject( ), the Serializable object that you pass it to is interrogated (using reflection, no doubt) to see if it implements its own writeObject( ). If so, the normal serialization process is skipped and the writeObject( ) is called. The same sort of situation exists for readObject( ). [ Add Comment ]

There’s one other twist. Inside your writeObject( ), you can choose to perform the default writeObject( ) action by calling defaultWriteObject( ). Likewise, inside readObject( ) you can call defaultReadObject( ). Here is a simple example that demonstrates how you can control the storage and retrieval of a Serializable object:

In this example, one String field is ordinary and the other is transient, to prove that the non-transient field is saved by the defaultWriteObject( ) method and the transient field is saved and restored explicitly. The fields are initialized inside the constructor rather than at the point of definition to prove that they are not being initialized by some automatic mechanism during deserialization. [ Add Comment ]

If you are going to use the default mechanism to write the non-transient parts of your object, you must call defaultWriteObject( ) as the first operation in writeObject( ) and defaultReadObject( ) as the first operation in readObject( ). These are strange method calls. It would appear, for example, that you are calling defaultWriteObject( ) for an ObjectOutputStream and passing it no arguments, and yet it somehow turns around and knows the reference to your object and how to write all the non-transient parts. Spooky. [ Add Comment ]

The storage and retrieval of the transient objects uses more familiar code. And yet, think about what happens here. In main( ), a SerialCtl object is created, and then it’s serialized to an ObjectOutputStream. (Notice in this case that a buffer is used instead of a file—it’s all the same to the ObjectOutputStream.) The serialization occurs in the line:

The writeObject( ) method must be examining sc to see if it has its own writeObject( ) method. (Not by checking the interface—there isn’t one—or the class type, but by actually hunting for the method using reflection.) If it does, it uses that. A similar approach holds true for readObject( ). Perhaps this was the only practical way that they could solve the problem, but it’s certainly strange. [ Add Comment ]

It’s possible that you might want to change the version of a serializable class (objects of the original class might be stored in a database, for example). This is supported but you’ll probably do it only in special cases, and it requires an extra depth of understanding that we will not attempt to achieve here. The JDK HTML documents downloadable from java.sun.com cover this topic quite thoroughly. [ Add Comment ]

You will also notice in the JDK HTML documentation many comments that begin with:

Warning: Serialized objects of this class will not be compatible with future Swing releases. The current serialization support is appropriate for short term storage or RMI between applications. ...

This is because the versioning mechanism is too simple to work reliably in all situations, especially with JavaBeans. They’re working on a correction for the design, and that’s what the warning is about. [ Add Comment ]

It’s quite appealing to use serialization technology to store some of the state of your program so that you can easily restore the program to the current state later. But before you can do this, some questions must be answered. What happens if you serialize two objects that both have a reference to a third object? When you restore those two objects from their serialized state, do you get only one occurrence of the third object? What if you serialize your two objects to separate files and deserialize them in different parts of your code? [ Add Comment ]

Here’s an example that shows the problem:

One thing that’s interesting here is that it’s possible to use object serialization to and from a byte array as a way of doing a “deep copy” of any object that’s Serializable. (A deep copy means that you’re duplicating the entire web of objects, rather than just the basic object and its references.) Copying is covered in depth in Appendix A. [ Add Comment ]

Animal objects contain fields of type House. In main( ), an ArrayList of these Animals is created and it is serialized twice to one stream and then again to a separate stream. When these are deserialized and printed, you see the following results for one run (the objects will be in different memory locations each run):

Of course you expect that the deserialized objects have different addresses from their originals. But notice that in animals1 and animals2 the same addresses appear, including the references to the House object that both share. On the other hand, when animals3 is recovered the system has no way of knowing that the objects in this other stream are aliases of the objects in the first stream, so it makes a completely different web of objects. [ Add Comment ]

As long as you’re serializing everything to a single stream, you’ll be able to recover the same web of objects that you wrote, with no accidental duplication of objects. Of course, you can change the state of your objects in between the time you write the first and the last, but that’s your responsibility—the objects will be written in whatever state they are in (and with whatever connections they have to other objects) at the time you serialize them. [ Add Comment ]

The safest thing to do if you want to save the state of a system is to serialize as an “atomic” operation. If you serialize some things, do some other work, and serialize some more, etc., then you will not be storing the system safely. Instead, put all the objects that comprise the state of your system in a single container and simply write that container out in one operation. Then you can restore it with a single method call as well. [ Add Comment ]

The following example is an imaginary computer-aided design (CAD) system that demonstrates the approach. In addition, it throws in the issue of static fields—if you look at the documentation you’ll see that Class is Serializable, so it should be easy to store the static fields by simply serializing the Class object. That seems like a sensible approach, anyway.

The Shape class implements Serializable, so anything that is inherited from Shape is automatically Serializable as well. Each Shape contains data, and each derived Shape class contains a static field that determines the color of all of those types of Shapes. (Placing a static field in the base class would result in only one field, since static fields are not duplicated in derived classes.) Methods in the base class can be overridden to set the color for the various types (static methods are not dynamically bound, so these are normal methods). The randomFactory( ) method creates a different Shape each time you call it, using random values for the Shape data. [ Add Comment ]

Circle and Square are straightforward extensions of Shape; the only difference is that Circle initializes color at the point of definition and Square initializes it in the constructor. We’ll leave the discussion of Line for later. [ Add Comment ]

In main( ), one ArrayList is used to hold the Class objects and the other to hold the shapes. If you don’t provide a command line argument the shapeTypes ArrayList is created and the Class objects are added, and then the shapes ArrayList is created and Shape objects are added. Next, all the static color values are set to GREEN, and everything is serialized to the file CADState.out. [ Add Comment ]

If you provide a command line argument (presumably CADState.out), that file is opened and used to restore the state of the program. In both situations, the resulting ArrayList of Shapes is printed. The results from one run are:

You can see that the values of xPos, yPos, and dim were all stored and recovered successfully, but there’s something wrong with the retrieval of the static information. It’s all “3” going in, but it doesn’t come out that way. Circles have a value of 1 (RED, which is the definition), and Squares have a value of 0 (remember, they are initialized in the constructor). It’s as if the statics didn’t get serialized at all! That’s right—even though class Class is Serializable, it doesn’t do what you expect. So if you want to serialize statics, you must do it yourself. [ Add Comment ]

This is what the serializeStaticState( ) and deserializeStaticState( ) static methods in Line are for. You can see that they are explicitly called as part of the storage and retrieval process. (Note that the order of writing to the serialize file and reading back from it must be maintained.) Thus to make CADState.java run correctly you must: [ Add Comment ]

Another issue you might have to think about is security, since serialization also saves private data. If you have a security issue, those fields should be marked as transient. But then you have to design a secure way to store that information so that when you do a restore you can reset those private variables. [ Add Comment ]

Tokenizing is the process of breaking a sequence of characters into a sequence of “tokens,” which are bits of text delimited by whatever you choose. For example, your tokens could be words, and then they would be delimited by white space and punctuation. There are two classes provided in the standard Java library that can be used for tokenization: StreamTokenizer and StringTokenizer. [ Add Comment ]

Although StreamTokenizer is not derived from InputStream or OutputStream, it works only with InputStream objects, so it rightfully belongs in the I/O portion of the library. [ Add Comment ]

Consider a program to count the occurrence of words in a text file:

Presenting the words in sorted form is easy to do by storing the data in a TreeMap, which automatically organizes its keys in sorted order (see Chapter 9). When you get a set of keys using keySet( ), they will also be in sorted order. [ Add Comment ]

To open the file, a FileReader is used, and to turn the file into words a StreamTokenizer is created from the FileReader wrapped in a BufferedReader. In StreamTokenizer, there is a default list of separators, and you can add more with a set of methods. Here, ordinaryChar( ) is used to say “This character has no significance that I’m interested in,” so the parser doesn’t include it as part of any of the words that it creates. For example, saying st.ordinaryChar('.') means that periods will not be included as parts of the words that are parsed. You can find more information in the JDK HTML documentation from java.sun.com. [ Add Comment ]

In countWords( ), the tokens are pulled one at a time from the stream, and the ttype information is used to determine what to do with each token, since a token can be an end-of-line, a number, a string, or a single character. [ Add Comment ]

Once a token is found, the TreeMap counts is queried to see if it already contains the token as a key. If it does, the corresponding Counter object is incremented to indicate that another instance of this word has been found. If not, a new Counter is created—since the Counter constructor initializes its value to one, this also acts to count the word. [ Add Comment ]

WordCount is not a type of TreeMap, so it wasn’t inherited. It performs a specific type of functionality, so even though the keys( ) and values( ) methods must be reexposed, that still doesn’t mean that inheritance should be used since a number of TreeMap methods are inappropriate here. In addition, other methods like getCounter( ), which get the Counter for a particular String, and sortedKeys( ), which produces an Iterator, finish the change in the shape of WordCount’s interface. [ Add Comment ]

In main( ) you can see the use of a WordCount to open and count the words in a file—it just takes two lines of code. Then an Iterator to a sorted list of keys (words) is extracted, and this is used to pull out each key and associated Count. The call to cleanup( ) is necessary to ensure that the file is closed. [ Add Comment ]

Although it isn’t part of the I/O library, the StringTokenizer has sufficiently similar functionality to StreamTokenizer that it will be described here. [ Add Comment ]

The StringTokenizer returns the tokens within a string one at a time. These tokens are consecutive characters delimited by tabs, spaces, and newlines. Thus, the tokens of the string “Where is my cat?” are “Where”, “is”, “my”, and “cat?” Like the StreamTokenizer, you can tell the StringTokenizer to break up the input in any way that you want, but with StringTokenizer you do this by passing a second argument to the constructor, which is a String of the delimiters you wish to use. In general, if you need more sophistication, use a StreamTokenizer. [ Add Comment ]

You ask a StringTokenizer object for the next token in the string using the nextToken( ) method, which either returns the token or an empty string to indicate that no tokens remain. [ Add Comment ]

As an example, the following program performs a limited analysis of a sentence, looking for key phrase sequences to indicate whether happiness or sadness is implied.

For each string being analyzed, a while loop is entered and tokens are pulled off the string. Notice the first if statement, which says to continue (go back to the beginning of the loop and start again) if the token is neither an “I” nor an “Are.” This means that it will get tokens until an “I” or an “Are” is found. You might think to use the == instead of the equals( ) method, but that won’t work correctly, since == compares reference values while equals( ) compares contents. [ Add Comment ]

The logic of the rest of the analyze( ) method is that the pattern that’s being searched for is “I am sad,” “I am not happy,” or “Are you sad?” Without the break statement, the code for this would be even messier than it is. You should be aware that a typical parser (this is a primitive example of one) normally has a table of these tokens and a piece of code that moves through the states in the table as new tokens are read. [ Add Comment ]

You should think of the StringTokenizer only as shorthand for a simple and specific kind of StreamTokenizer. However, if you have a String that you want to tokenize and StringTokenizer is too limited, all you have to do is turn it into a stream with StringBufferInputStream and then use that to create a much more powerful StreamTokenizer. [ Add Comment ]

In this section we’ll look at a more complete example of the use of Java I/O, which also uses tokenization. This project is directly useful because it performs a style check to make sure that your capitalization conforms to the Java style as found at java.sun.com/docs/codeconv/index.html. It opens each .java file in the current directory and extracts all the class names and identifiers, then shows you if any of them don’t meet the Java style. [ Add Comment ]

For the program to operate correctly, you must first build a class name repository to hold all the class names in the standard Java library. You do this by moving into all the source code subdirectories for the standard Java library and running ClassScanner in each subdirectory. Provide as arguments the name of the repository file (using the same path and name each time) and the -a command-line option to indicate that the class names should be added to the repository. [ Add Comment ]

To use the program to check your code, hand it the path and name of the repository to use. It will check all the classes and identifiers in the current directory and tell you which ones don’t follow the typical Java capitalization style. [ Add Comment ]

You should be aware that the program isn’t perfect; there are a few times when it will point out what it thinks is a problem but on looking at the code you’ll see that nothing needs to be changed. This is a little annoying, but it’s still much easier than trying to find all these cases by staring at your code.

The class MultiStringMap is a tool that allows you to map a group of strings onto each key entry. It uses a HashMap (this time with inheritance) with the key as the single string that’s mapped onto the ArrayList value. The add( ) method simply checks to see if there’s a key already in the HashMap, and if not it puts one there. The getArrayList( ) method produces an ArrayList for a particular key, and printValues( ), which is primarily useful for debugging, prints out all the values ArrayList by ArrayList. [ Add Comment ]

To keep life simple, the class names from the standard Java libraries are all put into a Properties object (from the standard Java library). Remember that a Properties object is a HashMap that holds only String objects for both the key and value entries. However, it can be saved to disk and restored from disk in one method call, so it’s ideal for the repository of names. Actually, we need only a list of names, and a HashMap can’t accept null for either its key or its value entry. So the same object will be used for both the key and the value. [ Add Comment ]

For the classes and identifiers that are discovered for the files in a particular directory, two MultiStringMaps are used: classMap and identMap. Also, when the program starts up it loads the standard class name repository into the Properties object called classes, and when a new class name is found in the local directory that is also added to classes as well as to classMap. This way, classMap can be used to step through all the classes in the local directory, and classes can be used to see if the current token is a class name (which indicates a definition of an object or method is beginning, so grab the next tokens—until a semicolon—and put them into identMap). [ Add Comment ]

The default constructor for ClassScanner creates a list of file names, using the JavaFilter implementation of FilenameFilter, shown at the end of the file. Then it calls scanListing( ) for each file name. [ Add Comment ]

Inside scanListing( ) the source code file is opened and turned into a StreamTokenizer. In the documentation, passing true to slashStarComments( ) and slashSlashComments( ) is supposed to strip those comments out, but this seems to be a bit flawed, as it doesn’t quite work. Instead, those lines are commented out and the comments are extracted by another method. To do this, the “/” must be captured as an ordinary character rather than letting the StreamTokenizer absorb it as part of a comment, and the ordinaryChar( ) method tells the StreamTokenizer to do this. This is also true for dots (“.”), since we want to have the method calls pulled apart into individual identifiers. However, the underscore, which is ordinarily treated by StreamTokenizer as an individual character, should be left as part of identifiers since it appears in such static final values as TT_EOF, etc., used in this very program. The wordChars( ) method takes a range of characters you want to add to those that are left inside a token that is being parsed as a word. Finally, when parsing for one-line comments or discarding a line we need to know when an end-of-line occurs, so by calling eolIsSignificant(true) the EOL will show up rather than being absorbed by the StreamTokenizer. [ Add Comment ]

The rest of scanListing( ) reads and reacts to tokens until the end of the file, signified when nextToken( ) returns the final static value StreamTokenizer.TT_EOF. [ Add Comment ]

If the token is a “/” it is potentially a comment, so eatComments( ) is called to deal with it. The only other situation we’re interested in here is if it’s a word, of which there are some special cases. [ Add Comment ]

If the word is class or interface then the next token represents a class or interface name, and it is put into classes and classMap. If the word is import or package, then we don’t want the rest of the line. Anything else must be an identifier (which we’re interested in) or a keyword (which we’re not, but they’re all lowercase anyway so it won’t spoil things to put those in). These are added to identMap. [ Add Comment ]

The discardLine( ) method is a simple tool that looks for the end of a line. Note that any time you get a new token, you must check for the end of the file. [ Add Comment ]

The eatComments( ) method is called whenever a forward slash is encountered in the main parsing loop. However, that doesn’t necessarily mean a comment has been found, so the next token must be extracted to see if it’s another forward slash (in which case the line is discarded) or an asterisk. But if it’s neither of those, it means the token you’ve just pulled out is needed back in the main parsing loop! Fortunately, the pushBack( ) method allows you to “push back” the current token onto the input stream so that when the main parsing loop calls nextToken( ) it will get the one you just pushed back. [ Add Comment ]

For convenience, the classNames( ) method produces an array of all the names in the classes container. This method is not used in the program but is helpful for debugging. [ Add Comment ]

The next two methods are the ones in which the actual checking takes place. In checkClassNames( ), the class names are extracted from the classMap (which, remember, contains only the names in this directory, organized by file name so the file name can be printed along with the errant class name). This is accomplished by pulling each associated ArrayList and stepping through that, looking to see if the first character is lowercase. If so, the appropriate error message is printed. [ Add Comment ]

In checkIdentNames( ), a similar approach is taken: each identifier name is extracted from identMap. If the name is not in the classes list, it’s assumed to be an identifier or keyword. A special case is checked: if the identifier length is three or more and all the characters are uppercase, this identifier is ignored because it’s probably a static final value such as TT_EOF. Of course, this is not a perfect algorithm, but it assumes that you’ll eventually notice any all-uppercase identifiers that are out of place. [ Add Comment ]

Instead of reporting every identifier that starts with an uppercase character, this method keeps track of which ones have already been reported in an ArrayList called reportSet( ). This treats the ArrayList as a “set” that tells you whether an item is already in the set. The item is produced by concatenating the file name and identifier. If the element isn’t in the set, it’s added and then the report is made. [ Add Comment ]

The rest of the listing is comprised of main( ), which busies itself by handling the command line arguments and figuring out whether you’re building a repository of class names from the standard Java library or checking the validity of code you’ve written. In both cases it makes a ClassScanner object. [ Add Comment ]

Whether you’re building a repository or using one, you must try to open the existing repository. By making a File object and testing for existence, you can decide whether to open the file and load( ) the Properties list classes inside ClassScanner. (The classes from the repository add to, rather than overwrite, the classes found by the ClassScanner constructor.) If you provide only one command-line argument it means that you want to perform a check of the class names and identifier names, but if you provide two arguments (the second being “-a”) you’re building a class name repository. In this case, an output file is opened and the method Properties.save( ) is used to write the list into a file, along with a string that provides header file information. [ Add Comment ]

The Java I/O stream library does satisfy the basic requirements: you can perform reading and writing with the console, a file, a block of memory, or even across the Internet (as you will see in Chapter 15). With inheritance, you can create new types of input and output objects. And you can even add a simple extensibility to the kinds of objects a stream will accept by redefining the toString( ) method that’s automatically called when you pass an object to a method that’s expecting a String (Java’s limited “automatic type conversion”). [ Add Comment ]

There are questions left unanswered by the documentation and design of the I/O stream library. For example, it would have been nice if you could say that you want an exception thrown if you try to overwrite a file when opening it for output—some programming systems allow you to specify that you want to open an output file, but only if it doesn’t already exist. In Java, it appears that you are supposed to use a File object to determine whether a file exists, because if you open it as a FileOutputStream or FileWriter it will always get overwritten. [ Add Comment ]

The I/O stream library brings up mixed feelings; it does much of the job and it’s portable. But if you don’t already understand the decorator pattern, the design is nonintuitive, so there’s extra overhead in learning and teaching it. It’s also incomplete: there’s no support for the kind of output formatting that almost every other language’s I/O package supports. [ Add Comment ]

However, once you do understand the decorator pattern and begin using the library in situations that require its flexibility, you can begin to benefit from this design, at which point its cost in extra lines of code may not bother you as much. [ Add Comment ]

If you do not find what you’re looking for in this chapter (which has only been an introduction, and is not meant to be comprehensive), you can find in-depth coverage in Java I/O, by Elliotte Rusty Harold (O’Reilly, 1999). [ Add Comment ]

Solutions to selected exercises can be found in the electronic document The Thinking in Java Annotated Solution Guide, available for a small fee from www.BruceEckel.com.

[57] Design Patterns, Erich Gamma et al., Addison-Wesley 1995.

[58] XML is another way to solve the problem of moving data across different computing platforms, and does not depend on having Java on all platforms. However, Java tools exist that support XML.

[59] Chapter 13 shows an even more convenient solution for this: a GUI program with a scrolling text area.